ShotShell SMB T23-93 by Tech23

Descriere

2x carcase de metal de inalta calitate reancarcabile pentru 9 (3x3) BB de 6 mm.

- refillable high-end metall shotshells for 9 (3x3) 6mm BBs -

• Especially designed for the Umarex t4e HDS68 CO2 shotgun.
• They can each be filled with 3x3 BBs in caliber 6mm (airsoft, aluminum or steel BBs ..) and loaded into the boom stick like real shotgun shells.
• The shells seal optimally in the chamber thanks to the conical flange.
• They are very easy to remove and insert without any tools ... almost as if the HDS68 had a cartridge ejector - like real shotguns.
• To load the 6mm round balls, 3 pieces each are inserted into the 3 barrels and pressed behind the HopUp rubber with a small stick (e.g. chopsticks).

The 3 balls are held in place by the Hop Up rubber in the back. The front area of the cartridges is used to accelerate the 9 balls.

When shot, 9 balls fly simultaneously towards the target. The scattering typical of shot loads covers a large target field. 

With 85mm long inner barrels, the T23-93 Skeetshells offer very good power output and reduced scatter.

The relatively large diameter of the cartridges enables the 9 bullets to be placed in three chambers. So only 3 balls have to be accelerated one after the other. This brings much better results than if you tried to blow out 4 or more BBs at the same time.

When using particularly heavy bullets (steel & lead) and / or reduced shooting performance (e.g. "F" models without tuning), only 1 or 2 bullets can be inserted per barrel in order to achieve good results.

SMB T23-93 Skeetshell - Shot cartridges are therefore ideal for action- and fun shooting. With an open valve chamber (simply remove the pressure chamber reducer ...) and use the Rocketkey.68, the HDS68 has up to 20 joules. This makes the Skeetshells very suitable for home defense and pest control.