Lanterna Armytek Wizard C2 WR
Descriere
Armytek Wizard C2 Pro Magnet USB is extremely compact, efficient, robust and headlamp that is easily charged with a magnetic charger. The headlamp has many different uses, such as fishing, cycling, running, etc. Wizard C2 Pro uses one and 18650 Li-Ion battery (included) and has a maximum luminous flux of up to 2500 lm (2330 for the warm white version) according to the manufacturer. At the highest setting, the lamp shines approx. 131 meters (129 m for the warm white version) according to the manufacturer. The lamp is dust and waterproof according to IP68. The Wizard C2 Pro Magnet USB is connected to a tilted and secured LED. The light on the LEDs has a wide effect, and the light is on and off. Wizard C2 Pro Magnet USB is available with both cool white and warm white light. The warm white LED has a slightly lower luminous flux, but it reproduces colors a little better than the one with cool white light. Choose the right option for you before you buy!
ATTENTION! The luminaire's highest light mode does not work with a regular 18650 battery, but requires a so-called HDC 18650 (High Discharge) battery, which is a type of battery that has a higher maximum discharge current.
Content
- Armytek Wizard C2 Pro Magnetic USB
- Headband
- 18650 Li-Ion battery (3500 mAh)
- Magnetic charger
- Belt clip
- Extra o-rings (2 pcs.)
- Manual
Technical specification
- Brand and model: Armytek Wizard C2 Pro Magnet USB
- Power supply: 3500 mAh 18650 Li-Ion battery (incl.)
- Manufacturer's reported luminous flux: 2500 lm (cool white) / 2330 lm (warm white)
- Manufacturer's reported range: 131 m (cool white) / 129 m (warm white)
- Manufacturer's reported burning time (highest light mode): 2 h 40 min (605 lm after 30 seconds)
- Light image: Combination
- Light modes: 12 pcs
- Dimensions: 112 x 33 mm
- Weight: 65 g
- Protection class: IP68
- Shock resistance: Drop from 10 meters
- Warranty: 120 months
WARNING! The light output of this headlamp is very high. Although the headlamp has active temperature monitoring that reduces the light output if the fixture overheats, the light energy itself can heat a nearby material to very high temperatures. It is therefore important to follow the safety instructions below:
- Do not leave the lamp on with an obstacle within 5 cm in front of the lens!
- Unscrew the bottom piece (the "cork" on the bottom of the lamp) half a turn to break the circuit and prevent accidental switching on, e.g. in a pocket.
- A strong and efficient lamp is absolutely no toy! Do not let the luminaire be used by a child without strict supervision!
Quick guide
Unscrew the bottom piece and insert the battery with the positive pole inwards. Tighten the bottom piece securely. The light is turned on and off with a simple push of the button. To change the light effect, press and hold the power switch when the lamp is on, then the lamp will cycle through the light modes. When the desired state is found, release the power switch. Maximum power can be accessed from any power mode by double-clicking the button. Charge the lamp by connecting the cable to a USB port on e.g. a power adapter or in a computer and connect the other end to the lamp's charging magnet.
Note! The bottom piece needs to be unscrewed 1/4 turn to start charging.